As Harrison says, there are some reasons for “Why do shaker bottles smell?” that are described below: 

  • Shaker bottles are widely used for preparing and transporting protein shakes, pre-workout drinks, and other supplements. Unfortunately, many people have noticed a terrible smell coming from their shaker bottles, which may be irritating and even embarrassing.
  • Shaker bottles can develop a smell for a variety of causes, including bacterial development, waste formation, and insufficient cleaning. But we will look into these sources in further depth and offer advice on how to prevent and eliminate shaker bottle odors. 


In this article, you’ll find:


  • How do I stop my shaker from smelling?
  • Should I wash my protein shaker?
  • How do you sterilize a shaker?
  • Can you put Boiling water in a shaker?
  • Can you put ice in a shaker bottle?
  • How do bartenders clean shakers between drinks?
  • FAQs about why do shaker bottles smell.

How do I stop my shaker from smelling?


If you're sick of dealing with a smelly shaker bottle every time you use it, there are a few things you can do to avoid and remove the smell. Here are some suggestions for keeping your shaker from stinking:

Properly clean the bottle.

The first and most crucial step in preventing your shaker from smelling is to fully clean it after each usage. Scrub the inside of the bottle with hot, soapy water with a bottle brush, giving special attention to the edges and holes where germs can hide. Before using it again, properly rinse the bottle with clean water and allow it to air dry entirely.

Make use of a cleaning solution.

A cleaning solution, in addition to normal soap and water, can be used to remove odor-causing germs. Put the solution into the bottle after combining one part vinegar and one part water. Let it rest for 15-20 minutes before washing it with clean water. You can also use a specialist shaker bottle cleaning solution, which is available at most health and fitness stores.

Freeze the bottle

If you're short on time and don't have time to clean your shaker bottle right away, try freezing it instead. Fill the bottle with water and freeze it until you're ready to clean it. The freezing process kills bacteria and prevents smells from producing.


Properly store the bottle

Correct storage is also vital for preventing the smell in shaker bottles. Always keep your bottle cool and dry, and avoid putting it in your workout bag or car for long periods of time. If you must transfer your shaker bottle, ensure sure it is dry and free of residue before storing it.

You can keep your shaker bottle clean and odor-free by following these guidelines, making it a more fun and practical tool for combining your favorite nutritional supplements.

Should I wash my protein shaker?

Yes, you should properly clean your protein shaker after each usage.  To prevent your bottle from stinking, thoroughly wash it. Protein shakes must be cleaned because they contain perishable ingredients such as milk, fruit, and vegetables. This is why:

Bacterial growth

After mixing your protein shake, little amounts of liquid may be left in the shaker container. This wet atmosphere promotes the growth and multiplication of bacteria, resulting in a strong smell. Cleaning your shaker bottle after each use prevents germ buildup and keeps the container clean and fresh.

Protein component

Protein powder can create dust in your shaker container that can be difficult to remove if kept for a long time. Cleaning your shaker bottle immediately after use keeps the protein residue from drying and hardening, making cleanup easier.

Infection prevention

Using a dirty shaker bottle can infect your protein shake or other supplements. This can result in stomach discomfort or even disease. You can guarantee that your shaker bottle is clean and pollutant-free by washing it after each use.

How do you sterilize a shaker?

Here are the steps you can follow to completely sanitize your shaker bottle.

Separate the bottle parts 

Separate your shaker bottle, including the cap, mixing ball, and any other removable parts. This will make cleaning and sterilizing each individual piece easier.

Use hot, soapy water to clean.

Cleanse the bottle with hot, soapy water with a bottle brush, giving special attention to any holes or corners where germs can hide. Thoroughly rinse with clean water.

Boiling water is used to sanitize.

Put a kettle of water to a boil with enough water to cover all of the components of your shaker bottle. Put each portion of the bottle in the boiling water for 2-3 minutes, ensuring that all sections are completely submerged.

Remove from the boiling water and allow to air dry.

Remove each component of the bottle from the boiling water and lay it on a clean, dry surface to completely dry. Before reassembling the bottle, ensure that all pieces are totally dry.

Using a disinfecting spray is optional.

If you want to be extra cautious, after washing and drying your shaker container, use a disinfectant spray. Search for a disinfectant that is appropriate for food contact surfaces and follow the label directions.

To get rid of any germs or other bacteria that might be hiding inside, sterilize your shaker bottle regularly. This is especially critical if you use it regularly or if it has a bad smell.


Can you put Boiling water in a shaker?

Here are some dos and don'ts to keep in mind when using boiling water in a shaker bottle:

Dos Don'ts
  • Use caution when handling hot water
  • Only use boiling water for particular tasks
  • Use heat-resistant materials
  • Leave enough space in the bottle
  • Follow the manufacturer's recommendations
  • Use non-heat-resistant materials
  • Overfill the bottle
  • Put the cap on immediately after pouring boiling water
  • Assume that all supplements require boiling water


Can you put ice in a shaker bottle?

Surely, ice can be put in a shaker bottle. These are some crucial considerations to keep in mind:

Verify the capacity of the shaker bottle

Before adding ice to a shaker bottle, ensure sure it has adequate capacity to hold both the ice and the other items you intend to add. Overfilling the bottle increases the risk of leakage and accidents.

Use smaller ice cubes

It is best to use smaller ice cubes or crush bigger cubes into smaller pieces to ensure that the ice fits properly inside the shaker bottle.

Add Ice lastly

It is normally advised to add ice last when making a cocktail in a shaker bottle. This allows you to manage how much ice you add while also preventing the ice from melting too soon and polluting the drink.

Shake vigorously

Once you've added the ice and other ingredients to the shaker bottle, shake forcefully to ensure that the drink is thoroughly combined and cold.

Be cautious with hot liquids

While you can add ice to a shaker bottle with cold liquids, adding ice to a shaker bottle with hot liquids might cause the bottle to break or even explode.

However, adding ice to a shaker bottle can be a great method to chill and freshen your drink. Simply follow these tips to ensure a successful and risk-free conclusion.

How do bartenders clean shakers between drinks?

To avoid cross-contamination and preserve the quality and safety of their cocktails, bartenders must clean shakers between drinks. Below are the steps they usually take:

  1. Empty any remaining contents of the shaker into the intended glass or container.
  2. Remove any additional shaker attachments, such as a strainer or pour spout.
  3. Rinse the shaker with warm water to remove any remaining liquids or debris.
  4. Scrub the interior and exterior of the shaker with a gentle sponge or brush and a small bit of dish soap.
  5. Rinse the shaker thoroughly with warm water to remove all soap residue.
  6. Use a clean towel to dry the shaker, or let it air dry upside down on a drying rack.
  7. When using the shaker for the next drink, reattach any extra accessories.


FAQs about why do shaker bottles smell.

How do bacteria grow in shaker bottles?

Bacteria can grow in shaker bottles if they are not cleaned and dried properly after use. Bacterial growth grows in warm, moist situations, so leaving a wet shaker bottle in a gym bag or car can encourage germs to multiply.


How can I get rid of the smell in my shaker bottle?

To remove the smell from your shaker bottle, soak it overnight in a solution of hot water and vinegar or baking soda, scrub away any residue or buildup with a bottle brush, or use a specialist cleaning solution made for shaker bottles.


Is it OK to keep using a smelly shaker bottle?

It is not suggested to continue using a bad-smelling shaker bottle because it may signal the existence of harmful bacteria or fungus. It is best to properly clean and disinfect the bottle before replacing it.


More stories

Meal Vs Protein Shake: Pros & Cons

When it comes to building muscle or maintaining a healthy diet, there are various options to consider. Two popular choices are meals and protein shakes. While meals are a traditional and familiar option, protein shakes have gained popularity in recent years as a quick and convenient way to meet daily protein requirements.

Protein Shake Consumption: Complete Guide

Humans have evolved in every possible aspect of life since its inception. There can be many domains to this, one of which is to look physically astounding and presentable. Diet plays an important role in one’s life, however, if taken in a balanced and calculated amount, it can bring satisfactory results. “Protein Shakes” are one of the very enriched protein sources for everyone.

More Products

Sold Out



Pink & Purple

£20 £25
Sold Out

Light & Dark Blue

£20 £25